Cofferdam Design and Construction Dewatering
$20.00A 2-PDH course on cofferdam design and construction dewatering, covering cofferdam types, loads and stability, seepage and piping, and dewatering methods.
Showing 1–16 of 19 results
-
-
Dam and Levee Geotechnical Engineering
$20.00A 2-PDH course on the geotechnical engineering of embankment dams and levees: seepage, stability, internal erosion, and safety.
-
Deep Foundations: Piles and Drilled Shafts
$20.00A 2-PDH course on deep foundations: pile and drilled-shaft types, axial and lateral capacity, group effects, and load testing.
-
Dewatering and Groundwater Control
$20.00A 2-PDH course on construction dewatering and groundwater control: methods, seepage, cutoffs, and effects on adjacent structures.
-
Excavation Support and Shoring Systems
$20.00A 2-PDH course on excavation support: soldier piles, sheet piles, secant/diaphragm walls, bracing, tiebacks, and safety.
-
Excavation Support Systems and Trench Safety (OSHA Subpart P)
$20.00A 2-PDH course on excavation support systems and trench safety under OSHA Subpart P, covering soil classification, protective systems, the competent person, and hazards.
-
Expansive and Problematic Soils
$20.00A 2-PDH course on expansive, collapsible, and other problematic soils: identification, behavior, damage, and mitigation.
-
Geosynthetics in Geotechnical Design
$20.00A 2-PDH course on geosynthetics: geotextiles, geogrids, geomembranes, and geocomposites — functions, applications, and design considerations.
-
Geotechnical Instrumentation and Monitoring
$20.00A 2-PDH course on geotechnical instrumentation and the observational method: instruments, what they measure, and interpreting data.
-
Ground Improvement Techniques
$20.00A 2-PDH course on ground improvement: densification, stone columns, deep soil mixing, grouting, preloading, and when each applies.
-
Groundwater Hydraulics and Well Drawdown Analysis
$20.00A 2-PDH course on groundwater hydraulics and well drawdown analysis, covering aquifer properties, Darcy’s law, steady and transient flow, and the Theis solution.
-
Retaining Walls and Earth-Retaining Structures
$20.00A 2-PDH course on earth-retaining structures: lateral earth pressures, gravity/cantilever/MSE walls, drainage, and stability checks.
-
Rock Mechanics and Rock Slope Engineering
$20.00A 2-PDH course on rock mechanics: rock mass classification, discontinuities, rock slope failure modes, and stabilization.
-
Seismic Geotechnical Engineering and Liquefaction
$20.00A 2-PDH course on geotechnical earthquake engineering: ground motion, site response, liquefaction triggering and consequences, and mitigation.
-
Shallow Foundation Design
$20.00A 2-PDH course on spread footing and mat foundation design: bearing capacity, settlement, eccentric loading, and proportioning per geotechnical principles.
-
Site Investigation and Subsurface Exploration
$20.00A 2-PDH course on planning and executing geotechnical site investigations: borings, sampling, in-situ testing (SPT, CPT), groundwater, geophysics, and the geotechnical report.
